|
Made in the USA
The GL-3028H Camouflage Golight
Stryker from Magnalight produces a 3,000 lumen light beam capable of reaching
over 5,000 feet in distance. This 35 watt HID Golight offers wired remote pan
and tilt control, a single dashmount joystick remote control, and a housing finished in a durabale
camouflage pattern. This Golight is weatherproof with a weatherproof remote
control and operates with 12 volt DC current.
The
GL-3028H HID HID Golight Stryker is designed for use in all weather conditions
and produces 3,000 lumens of intense light output. These units feature dash mounted, wired, remote
control operation that allows users to rotated the light 370 degrees with a hard
stop and to adjust vertical tilt through 140 degrees. Remote operation is
provided by a joystick style dash mounted remote that connects to the light via a 20 foot long controller wire. The remote is constructed of polycarbonate with rubber outercover for weatherproof durability and is mounted through 4 predrilled screw holes that are accessed by removing the rubber outer cover. Dash mount remotes are 4 inches long by 2.5 inches wide by 1/2 inch thick.
|
|
Remote Operation: Remote control functions include
an on/off button, and up, down, left and right movement is controlled by a center located joystick. The light
will continue movement as long as the joystick is held in position. Releasing the
joystick stops movement and holds the Golight in position. Fast and slow mode
buttons (turtle/hare) control the speed of the motor while the pan and tilt
functions of the joystick are operated. Holding the button for 12 seconds in fast mode
results in a full 370 degree rotation, and 8 seconds for full tilt. Slow mode is
used for pinpoint accuracy at distance and is approximately 35 seconds for full
rotation and 20 seconds for one full range of tilt.
Durability: The
GL-3028H Golight Stryker is designed for hunting and demanding outdoor use with
a weather resistant housing constructed of high quality ASA Luran thermoplastic
that is heat resistant, impact resistant, UV resistant and able to withstand
rugged use and abusive conditions. This particular Golight Stryker has a durable
camouflage finish that helps it to blend in well with natural surroundings,
making it ideal for hunting and military applications. Also available are white,
chrome and black finishes. Remote movement of this spotlight is provided by an
automotive grade internal motor, gear, and transmission assembly that is
constructed of LEXAN, brass, and stainless steel to provide rust and corrosion
resistance as well as long life and reliable operation.
Golight Mounting: This
light mounts using a detachable design with a separate permanent mount
interlocking stainless steel mounting plate that is affixed to the mounting
surface. The mounting plate is attached with 3 screws through predrilled holes
which secure the plate to the mounting surface. The Golight Stryker attaches to
the mounting plate via an interlocking base bracket and a single machine screw
which secures the Golight to the mounting plate. This design simplifies mounting
and allows users to easily detach the light from the mounting surface for
servicing or storage.
Remote Control Mounting: To mount the remote the user removes the outer rubber cover of the remote control to expose four predrilled holes, which allows them to securely attach the unit to a mounting surface with 4 screws. The remote requires that a 2 inch hole be drilled in the mounting surface to accommodate the rear portion of the controller and wiring harness. The rear "shaft" of the mount, in combination with the base plate secures the remote. Once mounted, the user simply slips the rubber cover back onto the remote. A 20 foot harness is included (32 foot available).
Power: This Golight is connected to power through an included 1
foot pigtail cord and user supplied 16 AWG wire to connect the unit to the
battery, fusebox, or to existing wiring. This light operates with 12 volts DC
and draws 3 amps after an initial 7.2 amps - 60 second startup amp draw, making
it ideal for vehicles, boats, ATVs, and similar sources of 12 volt direct
current.
Light Output: The
lamp in this Golight Stryker is a 35 watt high intensity discharge bulb which
produces 3,000 lumens, or a 15 million retail candle power rating. This bulb is
paired with a tight focus reflector and thick glass lens to produce a narrow
spot beam 5,331 feet in length. This lamp has a 4100K color temperature, giving
it very good color rendering and contrasting properties and the ability to
clearly and sharply illuminate objects at long distances. This beam is effective
to the far end of its reach, producing enough illumination to read a book by at
5300 feet.
This high power HID GOlight Stryker is ideal for
hunting, security, boating, law enforcement, emergency services, utilities, and
anywhere high power and remote control functionality are desired. This unit
produces a more powerful and far reaching beam than halogen spotlights and uses
less power on a 12 volt system, making it well suited to vehicles and boats
where power supply is limited.
NOTE: THIS GOLIGHT STRYKER MODEL HAS NO WIRELESS RECEIVER. IT IS DESIGNED FOR BOATS WITH CERTAIN UHF RADIOS, MILITARY VEHICLES WITH IED JAMMERS and OTHER APPLICATIONS WHERE RADIO INTERFERENCE COULD BE PROBLEMATIC. IT WORKS STRICTLY OFF THE HARD WIRED CONTROLLER.
| Golight Stryker
Features |
Superior HID
Benefits |
|
1.Weather proof lamp and remote control. 2.
Wired dash mount remote control with included 20 foot wiring harness for easy installaton. 35 foot cords are available when more length is required. 3. Wired remote control will not interfere with radios, military radio controlled devices. 4.Wired Remote Control requires no batteries. 5. Automotive grade 12 Volt D.C. high torque motor. 6.
Weatherproof connectors meet OEM vehicle manufacturer specifications
7. Meets marine standards for fresh water and saltwater use. 8. 3,000
Lumens, 5,331 foot Beam length 9. 12 Volt DC 3 amps continous draw after
startup. |
1. Far Longer Bulb Life than Halogen. 2. Higher
Color Temperature with Better Color Rendering and Contrasting. 3. More
Durable than Halogen. No Filament to Burn Out or Break.. 4. High Efficiency,
More Light with Less Power Drain. 5. Vibration Resistant 6. High Output.
7. Less frequent Outages, Higher Reliability and Fewer Bulb
Replacements.
| |