|
Made in the USA
The GL-3020H-32C-SE50 Golight Stryker from
Magnalight produces a 3,000 lumen light beam capable of reaching over 5,000 feet
in distance. This 35 watt HID Golight offers wired remote pan and tilt control,
a single dashmount joystick remote control with 32 foot cord, and a
durable white finish. This Golight is weatherproof with a weatherproof
remote control and operates with 12 volt DC current.
The
GL-3020H-32C-SE50 HID HID Golight Stryker is designed for use in all weather
conditions and produces 3,000 lumens of intense light output. These units
feature dash mounted, wired, remote control operation that allows users to
rotated the light 370 degrees with a hard stop and to adjust vertical tilt
through 140 degrees. Remote operation is provided by a joystick style dash
mounted remote that connects to the light via a 20 foot long controller wire.
The remote is constructed of polycarbonate with rubber outercover for
weatherproof durability and is mounted through 4 predrilled screw holes that are
accessed by removing the rubber outer cover. Dash mount remotes are 4 inches
long by 2.5 inches wide by 1/2 inch thick.
|
|
Remote Operation:
Remote control functions include an on/off button, and up, down, left and right
movement is controlled by a center located joystick. The light will continue
movement as long as the joystick is held in position. Releasing the joystick
stops movement and holds the Golight in position. Fast and slow mode buttons
(turtle/hare) control the speed of the motor while the pan and tilt functions of
the joystick are operated. Holding the button for 12 seconds in fast mode
results in a full 370 degree rotation, and 8 seconds for full tilt. Slow mode is
used for pinpoint accuracy at distance and is approximately 35 seconds for full
rotation and 20 seconds for one full range of tilt.
Durability: The
GL-3020H-32C-SE50 Golight Stryker is designed for demanding outdoor use with a
weather resistant housing constructed of high quality ASA Luran thermoplastic
that is heat resistant, impact resistant, UV resistant and able to withstand
rugged use and abusive conditions. This particular Golight Stryker has a durable
white finish that makes it ideal for vehicles and boats where an attractive
appearance is desired. Also available are black, camouflage, and chrome
finishes. Remote movement of this spotlight is provided by an automotive grade
internal motor, gear, and transmission assembly that is constructed of LEXAN,
brass, and stainless steel to provide rust and corrosion resistance as well as
long life and reliable operation.
Golight Mounting:
This light mounts using a detachable design with a separate permanent
mount interlocking stainless steel mounting plate that is affixed to the
mounting surface. The mounting plate is attached with 3 screws through
predrilled holes which secure the plate to the mounting surface. The Golight
Stryker attaches to the mounting plate via an interlocking base bracket and a
single machine screw which secures the Golight to the mounting plate. This
design simplifies mounting and allows users to easily detach the light from the
mounting surface for servicing or storage.
Remote Control
Mounting: To mount the remote the user removes the outer rubber cover
of the remote control to expose four predrilled holes, which allows them to
securely attach the unit to a mounting surface with 4 screws. The remote
requires that a 2 inch hole be drilled in the mounting surface to accommodate
the rear portion of the controller and wiring harness. The rear "shaft" of the
mount, in combination with the base plate secures the remote. Once mounted, the
user simply slips the rubber cover back onto the remote. A 32 foot harness is
included.
Power: This
Golight is connected to power through an included 1 foot pigtail cord and user
supplied 16 AWG wire to connect the unit to the battery, fusebox, or to existing
wiring. This light operates with 12 volts DC and draws 3 amps after an initial
7.2 amps - 60 second startup amp draw, making it ideal for vehicles, boats,
ATVs, and similar sources of 12 volt direct current. We also carry an AC/DC power converter that allows operation with common
110-120 VAC household current for security applications.
|
Light Output: The
lamp in this Golight Stryker is a 35 watt high intensity discharge bulb which
produces 3,000 lumens, or a 15 million retail candle power rating. This bulb is
paired with a tight focus reflector and thick glass lens to produce a narrow
spot beam 5,331 feet in length. This lamp has a 4100K color temperature, giving
it very good color rendering and contrasting properties and the ability to
clearly and sharply illuminate objects at long distances. This beam is effective
to the far end of its reach, producing enough illumination to read a book by at
5300 feet.
This high power HID GOlight Stryker is ideal for
hunting, security, boating, law enforcement, emergency services, utilities, and
anywhere high power and remote control functionality are desired. This unit
produces a more powerful and far reaching beam than halogen spotlights and uses
less power on a 12 volt system, making it well suited to vehicles and boats
where power supply is limited.
NOTE:
THIS GOLIGHT STRYKER MODEL HAS NO WIRELESS RECEIVER. IT IS DESIGNED FOR BOATS
WITH CERTAIN UHF RADIOS, MILITARY VEHICLES WITH IED JAMMERS and OTHER
APPLICATIONS WHERE RADIO INTERFERENCE COULD BE PROBLEMATIC. IT WORKS STRICTLY
OFF THE HARD WIRED CONTROLLER.
| Golight Stryker
Features |
Superior HID
Benefits |
|
1.Weather proof lamp and remote control. 2.
Wired dash mount remote control with included 20 foot wiring harness for easy
installaton. 35 foot cords are available when more length is required. 3.
Wired remote control will not interfere with radios, military radio controlled
devices. 4.Wired Remote Control requires no batteries. 5. Automotive
grade 12 Volt D.C. high torque motor. 6. Weatherproof connectors meet OEM
vehicle manufacturer specifications 7. Meets marine standards for
fresh water and saltwater use. 8. 3,000 Lumens, 5,331 foot Beam length 9.
12 Volt DC 3 amps continous draw after startup. |
1. Far Longer Bulb Life than Halogen. 2. Higher
Color Temperature with Better Color Rendering and Contrasting. 3. More
Durable than Halogen. No Filament to Burn Out or Break.. 4. High Efficiency,
More Light with Less Power Drain. 5. Vibration Resistant 6. High Output.
7. Less frequent Outages, Higher Reliability and Fewer Bulb
Replacements.
| |