GOLIGHT COLOR: White
GOLIGHT REMOTE CONTROLLED LIGHT CAPABILITIES:
- 370 degrees motorized rotation
- 140 degrees motorized tilt
- Fast/Slow speed options to improve positioning abilities
GOLIGHT REMOTE CONTROLLED LIGHT OUTPUT:
- Wired handheld remote control controls on/off of light beam
- Philips bulb - 12 Volts, 65 Watts
- Reflector–computer generated parabolic
- 5.5 amps draw
- 700 foot working beam (you can read a book at 700 feet)
- Candlepower - 5 million (new retail formula) or 400,000 (old industrial formula) more on candlepower
Handheld wired remote control and 16 foot power cord with cigarette plug. The wiring harness is a Y-shaped, with the cord attached to the light at one end and cigarette plug at the other end. The handheld remote control is in the center, linking the two cords. This enables the controller to turn the light on/off in addition to adjusting the tilt and rotation.
BEAM: Wide Spot beam - effective working beam of 700 feet (can read a book at 700 feet)
GOLIGHT MATERIALS:
- Housing--ASA Luran heat resistant, high impact, weather resistant housing with highest quality UV resistant material.
- Gears and transmission parts/engineering Lexan, and brass prevents rust, corrosion and oxidation that could impair performance.
- All connectors are weatherproof meet OEM vehicle manufacturer specifications
- Light gauge 16 foot wiring with multi-spring thin style cigarette plug.
GOLIGHT REMOVABLE MAGNETIC SHOE BASE:
- Golight slides on and off base of the light. When the shoe is installed a spring loaded button pops up locking the light into the base. The shoe base completely encapsulates the suction cup base
- When the base is removed, the light can be mounted using the suction cup and the locking lever on the side to activate the suction mount.
- The magnetic shoe has the holes in it to be permanently mounted as well.
- Small bar magnets are imbedded in the shoe base and covered with rubber.
- Magnetic base offers 40 pounds of magnetic grip. This is suitable for temporary positioning on vehicles, but not appropriate for moving vehicles. Please see our GL- GL-2000-M or GL-2051-M for 200 pound grip magnetic mount alternatives suitable for moving vehicles.
Once the shoe base is removed from the Golight, a suction cup mount can be used to attach the Golight to smooth surfaces. The suction cup mount is released via side mount lever. The suction cup is not suitable for moving vehicles, boats, etc.
GOLIGHT CUSTOMER SERVICE:
- 3 year warranty on all Golight Radioray models.
GOLIGHT REMOTE CONTROLLED LIGHT DIMENSIONS:
- Golight base: 6"X 6"
- Height: 8 inches
- Independent Lab Tested to meet or exceed all S.A.E. Standards
GOLIGHT CONDITIONS:
- Golight meets marine standards for fresh water and saltwater usage
- UV and weatherproof for outdoor use
- Ambient temp: -40C (-40F) to 60C (140F)
Click for GL-2XXX instructions
Click Here to see the Wiring Diagram for the GL-2020/2021 Models
Click Here for Long-Distance Spotlight Beam
GOLIGHT Spotlights - Portable Golight Remote Control Lights - Golight Radioray GL-5167-M Portable Wired Handheld Remote Control Spotlight -Magnetic Shoe
